The ultimate in bullet-proof lightweight strength,
100% TIG welded 4130N chrome moly construction! Same as above, but
constructed entirely from 1.25" x .095" 4130N chrome moly tubing.
Priced per pair -- Qty. 1 = 1 Pair
Note: Will not work
with KYB shocks
pivot joint solves the shortcomings of the factory rubber and
aftermarket polyurethane bushings. Our Del-Sphere
pivot joint incorporates a spherical ball which is surrounded by delrin
Del-Sphere pivot joint as a Delrin bushed
spherical rod end. After over a year of R&D testing here at
Spohn Performance on a streetable spherical joint the Del-Sphere pivot
joint is the final result. Designed and manufactured exclusively by
Spohn Performance, we have taken street suspension performance to the
next level. Our Del-Sphere pivot joint features a one piece forged and
heat treated chrome moly housing, a heat treated and chrome plated
chrome moly spherical ball, Delrin bushing cups, heat treated retainer
washer and snap ring, heat treated and chrome plated chrome moly
threaded adjuster ring, an external grease fitting and a beautiful
silver zinc plated housing finish. The delrin bushing cups absorb shock
and road noise so you get the quiet and smooth ride of a bushing as
well as 28 degrees of rotation! Our Del-Sphere pivot joints will always
ship to you fully assembled, however, we also offer an optional
adjusting tool that will allow you to do two things. First, you can
disassemble the Del-Sphere pivot joint for cleaning, inspection, etc.
Second, you can adjust the amount of friction on the spherical ball. Do
you want a very low friction pivot joint or a very tight pivot joint?
It's up to you, the amount of tension can be easily adjusted
by using our optional adjustment tool
to tighten or loosen the end retainer ring. What that also means is if
over time and miles the tolerances open up you can simply re-adjust the
retainer ring and have your pivot joint as tight as it was the day it
was brand new. We doubt you'll ever need to replace the Delrin bushing
cups, but they certainly can be. Unlike a spherical rod end,
the Del-Sphere pivot joint is 100% rebuildable.
is Delrin, and why
did you choose to use it?
Delrin is an acetal homopolymer made by DuPont. It is
characterized as having an excellent combination of physical properties
that make it suitable for numerous applications. With extremely low
moisture absorption and a low coefficient of friction
(self-lubricating), Delrin is uniquely tailored for wear applications
in high humidity or moisture environments. Delrin will maintain
constant physical properties under high moisture conditions and
out-perform nylon or polyurethane under these conditions. Delrin has a
10,000 psi tensile strength and a 120 Rockwell Hardness rating making
it ideal for our Del-Sphere application.
To obtain a Return Merchandise Authorization (RMA) please call us at 512-863-0900. No returns will be accepted without an RMA number! Please include a copy of the original receipt with the return. All returns must be postage paid. No COD or Freight collect returns will be accepted. All returns must be packaged properly; we are not responsible for damaged returns that resulted from improper packing. Shipping charges are not refundable. All return orders will be charged a 20% Restocking Fee.
You may return any parts to Texas Speed & Performance within 30 days from your date of order. No returns will be accepted after the 30 days have expired. All parts to be returned must be in their original condition. Texas Speed & Performance is not responsible for installation errors or damage due to improper installation or abuse. Parts damaged due to improper installation or abuse, are not returnable, and we are not responsible for any labor expenses, towing, rental car, or other expenses caused by the use of wrong or defective parts during installation. Labor charges by Non-Texas Speed & Performance facility are not covered. It is the installer's responsibility to verify correctness of all parts prior to installation. Shipping charges are not refundable. All return orders will be charged a 20% Restocking Fee.
All defects in workmanship done by Texas Speed & Performance may be returned for repair, replacement or credit. All repair work will be performed by Texas Speed & Performance. Any unauthorized work done will void any warranty, repair, replacement, or credit that would normally be covered and will render the item as non-returnable.
Non-Returnable Parts: Special-Order Parts, Installed Parts, Painted Parts, and Custom Made Parts cannot be returned for credit for any reason. Electrical parts are not returnable for credit if plugged in or unsealed for any reason. Installed parts and electrical parts are only covered against manufacturer defects and are subject to a warranty exchange only, at the manufacturer's discretion. Labor charges by Non-Texas Speed & Performance facility are not covered.
When ordering parts and accessories for vehicles still under the manufacturer's warranty, it is the vehicle owners responsibility to ensure that the warranty will not be adversely affected by the installation of these parts. If in doubt, please contact your local servicing dealership or the vehicle manufacturer before ordering. Texas Speed & Performance cannot accept return requests for parts due to vehicle warranty issues.
Warranty Parts: Most parts are warranted by the manufacturer, usually for 90 days from the date of purchase, unless specified otherwise. Parts used for racing or competition carry a manufacturer's defect warranty only. They are not warranted for breakage or wear under any circumstance. If you are returning electrical parts for warranty consideration please email customer service, as some manufacturers require the parts be sent directly back to the manufacturer. Texas Speed & Performance reserves the right to charge a restocking fee or refuse any parts that show evidence of being used or installed contrary to manufacturer's instructions, subjected to improper handling, packaging, or shipping by the customer. Labor charges by Non-Texas Speed & Performance facility are not covered.
Damaged or Missing Parts: In the event your order is damaged or items are missing it must be reported within seven days to 512-863-0900. Claims must be reported by invoice number and part number. Damaged or missing items will be claimed through the applicable shipping company. The customer will be refunded for any damaged or missing parts upon receipt of claim payment from the shipping company. The claim process usually takes 2 - 3 weeks.
Refunds for returns normally process and credit within 10 days from the date we receive your return at the warehouse. Once the return has been approved and processed, the refund will be credited to the credit card, Paypal account, or GoogleCheckout™ Account you used to buy the merchandise. Please be aware that your bank may take 4-7 business days to post the credit to your account or credit card. If you do not receive a credit after 17 days, please call us at 512-863-0900 and we will respond to you immediately. Shipping charges are not refundable. All return orders will be charged a 20% Restocking fee.
All information listed is subject to change without notice.