The rocker arms used on Yella Terra
and Street Terra roller rockers are infinitely stronger than standard pressed steel arms providing the best in resistance to bending and breakage under high spring pressures at high RPM's.
Pressed steel rocker arms, in high performance applications, are prone to failure, A high rate of fulcrum wear, flexing, cracking, splitting and breakage are common problems that will result in power loss or possible piston failure due to detonation of the incoming air/fuel charge. Other Yella Terra
rocker components such as the trunnions, posi locks and bearings greatly enhance valve train durability in performance applications.
The traditional metal tip on standard rockers literally drags across the valve tip as the rocker opens and closes causing high side loading on the valve. This inside force leads to irregular and rapid valve, valve guide and valve seat wear in many engines. The roller tip on Yella Terra
and Street Terra roller rockers eliminates this side loading action, as a result engines rev quicker and freer with a crisper exhaust note.
The use of needle roller bearings at the rocker fulcurm combined with roller tip at the valve greatly reduces horsepower robbing friction in the valve train to provide a measurable power increase over standard rocker systems.
The reduction in friction with roller rockers has additional benefits of reducing the operating temperature and foaming effect of engine oil to provide a cooler running engine.
Use of high performance hydraulic or mechanical camshafts requires some form of valve train length adjustment to achieve correct clearance and geometry. Adjustable roller rockers allow these corrections to be made quickly and easily.
and Street Terra "Easy Fit" shaft and pedestal designs offer the most rigid rocker system without using restraining devices such as guide plates, screw in studs and stud girdles. The result is more consistent valve lift and vastly improved valve train reliability at substantially lower cost.
The Platinum Race rockers are designed for the most severe race applications and have the feature of wide body arms for even greater strength and resistance to deflection. All Platinum rockers feature a heavy duty 7/16" mountings for unsurpassed rocker stability.The Platinum rockers are available in twin shaft versions for parallel valve applications and unique single shaft designs for cant valve small block and big block engines. The range covers most popular factory and aftermarket performance heads in a choice of ratios.
Rigid Mounted 7/16"
Pedestal and Shaft
Single and Twin Shaft
Solid roller cam and flat tappet applications
**VALVE COVER SPACERS WILL BE REQUIRED! YOU WILL HAVE TO DRILL AND TAP YOUR CYLINDER HEADS TO ACCOMODATE THE 7/16" BOLT!**