Today’s aftermarket world makes it easy to pick up the phone and order 1000 HP for your street car. This has created several challenges for fuel delivery, ranging from hot fuel handling to pump noise. Aeromotive has accepted this challenge and hurdles past them with the latest addition to the Phantom line: the Dual Phantom.
The Dual Phantom comes loaded with two 340lph pumps, an additional set of electrical bulkheads, and a larger capacity foam and bladder. Remarkably, it does not take up any additional space. The dual pumps provide opportunity for supporting big power (see power ratings below) while remaining OE quiet. Separate electrical bulkheads allow for an “on demand” fuel system, which reduces the amount of returned fuel and reduces the tank temperature, making vapor lock and cavitation a thing of the past. Also, this feature is a must when a redundant (back up) pump is needed in extreme conditions, such as off-road, desert, and endurance racing. The larger capacity foam and bladder combat fuel slosh while retaining enough fuel to feed the dual pumps. And the best feature is all of this done from your stock tank with no welding or fabrication!
More about the Phantom Are you considering a switch to EFI or swapping in that late model motor? What has become the latest trend in hot rodding has been plagued by fuel delivery. The most common question is: “what do I do for a tank”? Until now, it’s been one of three options: weld in a sump to your tank, go with a fuel cell or pay for a custom tank. Aeromotive’s Phantom Fuel System gives you a fourth option: putting a high performance fuel pump inside virtually any fuel tank, including your factory tank.
Simply cut a hole in your tank and measure the depth. Cut your pump hanger bracket and baffle/basket foam to length. Insert the baffle, install the retainer ring and gasket, and bolt your pump and hanger down. That’s it. Now you have a fuel pump inside your factory tank capable of supporting big horsepower EFI or Carbureted. And it’s whisper quiet. No more welding sumps or using up trunk space with fuel cells. No more hot fuel handling issues, like vapor-lock, and no more fuel slosh. The Phantom’s internal baffle / basket controls fuel slosh and keeps the fuel pump submerged in fuel, even at low fuel levels and in aggressive driving. The best part about this whole system: it’s completely universal. This system will fit virtually any tank from 6” deep to 11” deep, plastic, steel, aluminum, corrugated or smooth. One system that gives you everything you need to fuel your ride. Its serious performance you will never know is there!
Click here to learn more about this universal in tank fuel system.
Patent No. 8,783,287
Features and Specifications:
• (2) 340 lph Stealth Fuel Pumps
• Supports up to
- 1400 HP EFI - Forced Induction
- 1700 HP EFI - Naturally Aspirated
- 1700 HP Carbureted - Forced Induction
- 2000 HP Carbureted - Naturally Aspirated
• Black anodized top hat
• (4) ORB-06 Ports – 2x Supply, (1) Return, (1) Vent
• Larger Capacity fuel resistant baffle / basket (Includes: Foam and Bladder)
• (2) Universal high flow pre-pump filters
• Modular design can be cut to height to fit almost any fuel tank
• EFI or Carbureted
• Turbine pump mechanisms increase durability
• In-tank use only
To obtain a Return Merchandise Authorization (RMA) please call us at 512-863-0900. No returns will be accepted without an RMA number! Please include a copy of the original receipt with the return. All returns must be postage paid. No COD or Freight collect returns will be accepted. All returns must be packaged properly; we are not responsible for damaged returns that resulted from improper packing. Shipping charges are not refundable. All return orders will be charged a 20% Restocking Fee.
You may return any parts to Texas Speed & Performance within 30 days from your date of order. No returns will be accepted after the 30 days have expired. All parts to be returned must be in their original condition. Texas Speed & Performance is not responsible for installation errors or damage due to improper installation or abuse. Parts damaged due to improper installation or abuse, are not returnable, and we are not responsible for any labor expenses, towing, rental car, or other expenses caused by the use of wrong or defective parts during installation. Labor charges by Non-Texas Speed & Performance facility are not covered. It is the installer's responsibility to verify correctness of all parts prior to installation. Shipping charges are not refundable. All return orders will be charged a 20% Restocking Fee.
All defects in workmanship done by Texas Speed & Performance may be returned for repair, replacement or credit. All repair work will be performed by Texas Speed & Performance. Any unauthorized work done will void any warranty, repair, replacement, or credit that would normally be covered and will render the item as non-returnable.
Non-Returnable Parts: Special-Order Parts, Installed Parts, Painted Parts, and Custom Made Parts cannot be returned for credit for any reason. Electrical parts are not returnable for credit if plugged in or unsealed for any reason. Installed parts and electrical parts are only covered against manufacturer defects and are subject to a warranty exchange only, at the manufacturer's discretion. Labor charges by Non-Texas Speed & Performance facility are not covered.
When ordering parts and accessories for vehicles still under the manufacturer's warranty, it is the vehicle owners responsibility to ensure that the warranty will not be adversely affected by the installation of these parts. If in doubt, please contact your local servicing dealership or the vehicle manufacturer before ordering. Texas Speed & Performance cannot accept return requests for parts due to vehicle warranty issues.
Warranty Parts: Most parts are warranted by the manufacturer, usually for 90 days from the date of purchase, unless specified otherwise. Parts used for racing or competition carry a manufacturer's defect warranty only. They are not warranted for breakage or wear under any circumstance. If you are returning electrical parts for warranty consideration please email customer service, as some manufacturers require the parts be sent directly back to the manufacturer. Texas Speed & Performance reserves the right to charge a restocking fee or refuse any parts that show evidence of being used or installed contrary to manufacturer's instructions, subjected to improper handling, packaging, or shipping by the customer. Labor charges by Non-Texas Speed & Performance facility are not covered.
Damaged or Missing Parts: In the event your order is damaged or items are missing it must be reported within seven days to 512-863-0900. Claims must be reported by invoice number and part number. Damaged or missing items will be claimed through the applicable shipping company. The customer will be refunded for any damaged or missing parts upon receipt of claim payment from the shipping company. The claim process usually takes 2 - 3 weeks.
Refunds for returns normally process and credit within 10 days from the date we receive your return at the warehouse. Once the return has been approved and processed, the refund will be credited to the credit card, Paypal account, or GoogleCheckout™ Account you used to buy the merchandise. Please be aware that your bank may take 4-7 business days to post the credit to your account or credit card. If you do not receive a credit after 17 days, please call us at 512-863-0900 and we will respond to you immediately. Shipping charges are not refundable. All return orders will be charged a 20% Restocking fee.
All information listed is subject to change without notice.