EBC 97-04' Corvette 5.7L Front Brake Kit - Greenstuff Pads and GD Rotors

**Pictures are Representational, actual products may vary**
Side of Vehicle: Front
Solid vs Vented:V
Number Of studs: 5
Rotor Diameter (mm): 325
Height (mm):46
“New” Thickness (mm): 32
“Minimum” Thickness (mm): 30
PCD (mm):120.7
Center Hole Diameter (mm): 70.6
Pad Part Number: DP21162
Rotor Part Number: GD7010
Pad Type: GREENSTUFF
Rotor Type: GD
Vehicle Fitment: 97-04' Corvette 5.7L

Greenstuff™ 6000 series is regarded as a first level brake improvement over stock and can deliver up to 15% improvement in stopping power. However Greenstuff™ 6000 is not a hard and long lasting pad and drivers may find Greenstuff™ last less miles on light Trucks and SUV thanGreenstuff™ 6000 series is regarded as a first level brake improvement over stock and can deliver up to 15% improvement in stopping power. However Greenstuff™ 6000 is not a hard and long lasting pad and drivers may find Greenstuff™ last less miles on light Trucks and SUV than stock units which in our opinion are designed primarily to pass the warranty period but 6000 are a good quality pad replacement with medium dusting and good brake effect.

When replacing brakes of any kind please remember how important brake safety is to your own well being and either have a professional mechanic install your new brakes or if you are a qualified mechanic use the EBC installation DVD as a guide in support of your vehicle owner’s manual. stock units which in our opinion are designed primarily to pass the warranty period but 6000 are a good quality pad replacement with medium dusting and good brake effect.

Where castings or finished rotors have been bought in to complement the range, the strictest quality controls you can imagine ensure the safety and quality of the parts we sell. EBC adds value to its products by strictest quality controls and specifications and a 100% run out and dimensional check, plus all USA sport rotors are slotted at the Las Vegas facility of the USA operation. We employ 14 people in our USA rotor machining facility alone and have a bank of 8 HAAS and Feeler CNC machines using the latest CNC controls and tooling for superb accuracy.

EBC Brakes produces all of its GD series and USR discs with a long lasting corrosion resistant finish. The coating is either the world famous thermic or for less popular smaller batch items we use the new NITROTHERM™ process of anti corrosive paint applied using this revolutionary process that coats with warm Nitrogen producing a better finish